|
|
service & support - how to get the best from Murrayplant
|
Why Use Murrayplant?
- We have the widest range of groundwork products and associated
non-mechanical plant available to meet your requirements
- With Murrayplant depots in Glasgow and Inverness and
14 Mabey Hire locations in England and Wales, we provide the best distribution network of any
supplier
- Hire charges after the minimum hire period are calculated on a daily basis
- Our quality management system has been assessed and registered against
the provisions of ISO 9001. The accreditation covers all our activities.
|
 |
Engineering Support
- Our local engineers can provide technical assistance at pre-tender stage
as well as on-site support.
- Our engineering staff have extensive practical experience gained in the construction industry
- State-of-the-art computer drafting and design facilities ensure high standards and rapid response times.
|
|
|
|
C.D.M. and M.H.S.W Regulations
To comply with current regulations we provide risk assessment sheets with our schemes.
These identify:
- Hazards that may be associated with a particular scheme under consideration
- Hazards that may be associated with the proprietary equipment proposed for a scheme
Customers are then requested to complete the assessments by adding risk ratings.
|
|
|
|
Technical Data Manual
Customers with an in-house temporary works department may wish to retain a copy of the Murrayplant/
Mabey Hire Technical Data Manual for easy reference. Available on Compact Disc, this contains:
- Technical information including brochures
- User information for each product
- Technical data sheets and risk assessment sheets
This manual is issued on a controlled basis so that we can update holders of the manual as necessary.
|
|
|
|
Ordering
- We aim to provide immediate response to your requirements, although advance
orders do assist us in providing you with the best possible service
- Please give as full a site address as possible and a site telephone number
if possible
- Please quote an order number
|
|
Deliveries
- Unloading the delivery vehicle is the responsibility of the customer.
Please ensure you have a suitable lifting appliance available for off-loading
- Special vehicles e.g. lorry loaders, articulated lorries or low loaders can
be arranged to deliver the equipment at extra cost
- Should you require delivery on a lorry loader, you should be aware that
there is a Code of Practice for the Safe use of Lorry Loaders (BS 7121 Part 4 1997) under
which you are required to establish a Safe System of Work
|
|
Using the Equipment
- Use the equipment as set out in our user guides or as advised in writing
by our engineering department
- It is in your interest to look after the equipment as loss charges can
mount up, be it through theft or otherwise
|
|
|
|
Off-hiring
- The equipment is considered to be on hire until you inform us of the date
that it is available for collection, or the date you return it to our depot
- We undertake to collect the equipment within 14 days of the off-hire date,
it is your responsibility during this period
- If you are leaving site, please note that we require at least 7 days’
notice to arrange the transport, and we require you to be on site to ensure there is a safe system of work in
place for the loading operation. Should we arrive on site to find there is not a safe means of collecting the
equipment, we reserve the right not to proceed with the collection and to charge you for the wasted journey
- Please advise the depot what is to be collected, especially if it is not
all the equipment on site and obtain from them an "off-hire number" for your records
|
|
|
|
Collections
- Reloading the collection vehicle is the responsibility of the customer.
Please ensure you have a suitable lifting appliance available for loading
- Should you request a lorry loader, you should be aware that there is a
Code of Practice for the Safe use of Lorry Loaders (BS 7121 Part 4 1997) under which you are
required to establish a Safe System of Work
|
|
|
|
Returns
When returning equipment on your own transport, please ensure that the equipment is counted at the depot and the
amounts entered on the "checking-in-return" form, a copy of which should be taken by your driver.
Loss/Damage
- Loss and damage cannot be assessed at the time of return and will be
advised on the Goods Inwards Note sent to your invoice address
- Small outstanding amounts of equipment will be assumed lost to prevent
ongoing hire charges
- Large outstanding amounts will continue on hire unless the depot is
notified
- Where high damage charges are anticipated, you will be informed by
telephone so that you can inspect the goods in our yard within 7 days
- Please direct all queries related to checking-in-returns and Goods Inwards
note to the issuing depot as soon after receipt as possible
|
|
|
|
|
|
|
|
|
